WTHD / Department of Mechanical Engineering, Delft University of Technology
Vanaf half 1986 uitg.: TU Delft, Delft University of Technology. Faculty of Mechanical Engineering. - Vanaf september 1988 uitg.: TU Delft, Delft University of Technology, Faculty of Mechanical Engineering and Marine Technology
| rdfs:label | "WTHD / Department of Mechanical Engineering, Delft University of Technology" |
| schema:name | "WTHD" |
| schema:author | Technische Hogeschool (Delft). Afdeling der Werktuigbouwkunde |
| schema:contributor | Technische Universiteit (Delft). Faculteit der Werktuigbouwkunde en Maritieme Techniek |
| Technische Universiteit (Delft). Faculteit der Werktuigbouwkunde | |
| schema:description | "Vanaf half 1986 uitg.: TU Delft, Delft University of Technology. Faculty of Mechanical Engineering. - Vanaf september 1988 uitg.: TU Delft, Delft University of Technology, Faculty of Mechanical Engineering and Marine Technology" |
|
schema:same |
<http:/ |
|
schema:main |
<https:/ |
|
http:/ |
"1968-1988" |
| schema:about | mechanische technologie |
|
schema:in |
"nl" |
| schema:issn | "01660764" |
| schema:publication |
<https:/ |
Inverse relations
[ .. ] → schema:isPartOf → WTHD / Department of Mechanical Engineering, Delft University of Technology
A constitutive theory for materials possessing a natural reference state / E. van der Giessenschema:ProductModel
A contribution to the numerical description of rotating two-phase flow / by R. van der Welleschema:ProductModel
A derivation of the concept of entropy from the axioms of continuum physics / G.D.C. Kuikenschema:ProductModel
A finite element approach to shell problems / by L.J. Ernstschema:ProductModel
A general model for unconfined bubble plumes from extended sources / by A.K. Chestersschema:ProductModel
A general theory for the interaction between local and overall buckling of stiffened panels / by W. T. Koiter and M. Pignataroschema:ProductModel
A geometrically non-linear finite element shell theory : applications to the postbuckling behaviour of shells / by L.J. Ernstschema:ProductModel
A geometrically nonlinear finite element shell theory / L.J. Ernstschema:ProductModel
A note on the centrifugal scaling of horizontal isothermal, liquid-gas flows without mass transfer / by A.K. Chestersschema:ProductModel
A study of flow phenomena in internal (piston) combustion engines / by Jan Jeen Seppenschema:ProductModel
A study of some aspects of the mechanical behaviour of cross-spring pivots and plate spring mechanisms with negative stiffness / by J.F. Dijksmanschema:ProductModel
A theoretical mofel for core-annular flow of a very viscous oil core and a water annulus through a horizontal pipe / by G. Ooms ... [et al.]schema:ProductModel
Absorption refrigeration machines : theoretical and experimental assessment of the performance of aqua-ammonia absorption machines operated at marginal conditions, e.g. when powered by solar or waste heat : development of a new type of absorber / by C. Keizerschema:ProductModel
Afslingerkoeling in tandwieloverbrengingen met rechte tanden = Flying-off cooling of straight spur gears / door G.J.J. van Heijningenschema:ProductModel
Agglomeration in suspension / A.S. Bos ; Department of Mechanical Engineering, Delft University of Technologyschema:ProductModel
Agglomeration in suspension : a study of mechanisms and kinetics / by G.G. Bemerschema:ProductModel
An analytical solution for the profile and volume of a small drop or bubble symmetrical about a vertical axis / by A. K. Chestersschema:ProductModel
An asymtotic analysis of a plate with a circular hole / A.M.A. van der Heijdenschema:ProductModel
An asymtotic theory for flexural vibrations of circular plates / by A.M.A. van der Heijdenschema:ProductModel
An experimental and theoretical investigation of creep under uni-axial stress of a Mg-Alloy / by J.H. Lambermont and J.F. Besselingschema:ProductModel
... show all 146